Unkrautfuchs - FoxOne incl. 2 x special descaler 120 g

for comfortable working at any height Recommended from a height of 1.85 mEasy to fit between the gun and lance Compatibility: The extension is only suitable for devices in the CH1.1 series. The extension does not fit the CH1 series.Note on the appropriate variant Please check the serial number of your device: Variant CH1: Devices with serial numbers up to 009120Variant CH1.1: Devices with serial numbers from 009121 onwards The type plate with the serial number can be found on the back of the device.

Profi Nozzle Consisting of point nozzle and screen for more effective application Even higher efficiency Precise application Higher working speed Hold the water screen over the stalk of the plant as usual

Highly effective mixture of various food-grade fruit acids for non-toxic descaling and to prevent limescale formation in Unkrautfuchs appliances. Ingredients : 30% citric acid, 5% tartaric acid, 5% lactic acid (purely vegetable). 100% of the ingredients are of natural origin. Dosage recommendation for intensive descaling : Add 1 tablespoon (12g) to the 1/2 full tank. Let the Unkrautfuchs run for 3 minutes, then leave the appliance to stand for 10 minutes. You can then continue working as normal. UFI : U800-W02P-R007-TD20 Distribution / Sales Haussmann GmbH, Postauer Str. 34 D-84109 Wörth/Isar, www.unkrautfuchs.de Developed and manufactured in Austria / Made in Austria KECKEX GmbH, Austraße 30, A-683 IMPORTANT : Not suitable for acid-sensitive materials. If in doubt, test on inconspicuous areas. Keep out of the reach of children. Causes severe eye irritation. Wear eye protection / face protection. In case of contact with eyes : Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing. If eye irritation persists : Seek medical advice / attention. Keep identification label ready. Dispose of contents / container in accordance with local / regional / national / international regulations. ℮ 120 g / ℮ 240 g

Highly effective mixture of various food-grade fruit acids for non-toxic descaling and to prevent limescale formation in Unkrautfuchs appliances. Ingredients : 30% citric acid, 5% tartaric acid, 5% lactic acid (purely vegetable). 100% of the ingredients are of natural origin. Dosage recommendation for intensive descaling : Add 1 tablespoon (12g) to the 1/2 full tank. Let the Unkrautfuchs run for 3 minutes, then leave the appliance to stand for 10 minutes. You can then continue working as normal. UFI : U800-W02P-R007-TD20 Distribution / Sales Haussmann GmbH, Postauer Str. 34 D-84109 Wörth/Isar, www.unkrautfuchs.de Developed and manufactured in Austria / Made in Austria KECKEX GmbH, Austraße 30, A-683 IMPORTANT : Not suitable for acid-sensitive materials. If in doubt, test on inconspicuous areas. Keep out of the reach of children. Causes severe eye irritation. Wear eye protection / face protection. In case of contact with eyes : Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing. If eye irritation persists : Seek medical advice / attention. Keep identification label ready. Dispose of contents / container in accordance with local / regional / national / international regulations. ℮ 120 g / ℮ 240 g

For using the Unkrautfuchs as a steam cleaner e.g. for cleaning bicycle rims Brush diameter : 30 mm

For using the Unkrautfuchs as a steam cleaner e.g. for steam cleaning larger surfaces Brush diameter : 40 mm

For using the Unkrautfuchs as a steam cleaner With rubber lip e.g. for steam cleaning windows Brush width : 135 mm

For using the Unkrautfuchs as a steam cleaner Use in combination with the window brush Scope of delivery : Cloth cover (without window brush)

Applicator with 3 distributor nozzles For optimum treatment of weeds Precise application

Set contains sealing rings for the Unkrautfuchs 2 x sealing ring for Easy Fit adapter 2 x sealing ring for gun 2 x sealing ring for lanceFor new device orders suitable version CH1.1 Note on the appropriate variant: Please check the serial number of your device to select the correct variant: Variant CH1: suitable for devices with serial numbers: 000001–009120 Variant CH1.1: suitable for devices with serial numbers from 009121 onwards The type plate with the serial number can be found on the back of the device.

Applicator for steam cleaning with the Unkrautfuchs Angled end piece for working in a standing position Precise application Ideal for joints and other hard-to-reach areas

Easy Fit adapter for quick replacement of the various steam nozzles With our plug-in system, the various attachments can be replaced quickly and easily Mounting directly on the gun of the Unkrautfuchs Suitable for devices in the CH1.1 series Note on the appropriate variant: Please check the serial number of your device to select the correct variant: Variant CH1: suitable for devices with serial numbers: 000001–009120Variant CH1.1: suitable for devices with serial numbers from 009121 onwards The type plate with the serial number can be found on the back of the device.

Easy Fit adapter for quick replacement of the various water nozzles With our plug-in system, the various attachments can be replaced quickly and easily Mounting on the lance of the Unkrautfuchs